Hoe de schoorsteenelleboog van de open haarden te installeren?

Expanding on the topic of installing ventilation devices for fireplaces can be challenging, especially when dealing with existing flues and masonry structures. In such cases, the installation process becomes more difficult and requires additional effort to ensure effectiveness.

One key component that can aid in the installation process is the fireplace elbow. This is an angled pipeline that allows for better manipulation of the ventilation system. The elbow can rotate in any direction and is available in different angles, such as 15, 30, 45, and 90 degrees, making it suitable for various situations.

The elbow is particularly useful when it comes to the overall horizontal installation of the fireplace chimney. However, it is not recommended for use in the entire vertical installation of the chimney, except when necessary conditions are met. The reason for this is the accumulation of solid particles left in the ventilation system after burning wood. The offset of the chimney elbow plays a crucial role in dealing with these solid particles.

In the United States, the maximum recommended angle for the elbow is 30 degrees, while in Canada, it is 45 degrees. For devices that use practical direct exhaust or B-type ventilation, an offset angle of up to 90 degrees can be utilized. This is to prevent the accumulation of solid particulate matter in the chimney elbow connection after the combustion process.

The use of the elbow does, however, limit the flow of gas and smoke. For optimal smoke discharge, it is best for the smoke to escape through a vertically installed smoke pipeline. This is why installing the elbow in the vertical direction is discouraged. If it is necessary to use an elbow in a vertical installation, a 45-degree angle can be chosen, but a 90-degree elbow is not recommended.

However, it is important to note that while a 90-degree elbow is not allowed in vertical installation, it is permitted in horizontal installation. In order to redirect the vertical fireplace tobacco pipe to the wall, a 90-degree elbow is necessary. Before installing the elbow, it is essential to have vertical pipes that extend at least 25-30 cm from the stove. This length provides sufficient time for the fireplace to establish ventilation before being limited by the angle of the elbow.

When purchasing an elbow, it is crucial to consider the type of fireplace you have. The ventilation device for a gas fireplace can be made of aluminum and galvanized steel, while fireplaces typically utilize a flue made of stainless steel. This is because fireplaces require more powerful heat. Keeping this in mind is important before making a purchase.

In conclusion, installing ventilation devices for fireplaces can be challenging, particularly when existing flues and masonry structures are involved. The fireplace elbow serves as a valuable tool in this process, allowing for better manipulation of the ventilation system. However, its usage is to be carefully considered in terms of offset angles and direction of installation. By understanding these factors and selecting the appropriate type of elbow for your fireplace, you can ensure a safe and efficient ventilation system.

I hope this expanded article provides you with additional insights into fireplace ventilation and addresses any questions you may have had. If you still require further clarification, please feel free to leave a message for the editor, and I will be happy to provide individualized responses.