As you can see, All water vapor fireplace has a really neat design. Both Led and ULT are important.Ultrasonic fireplaces are not too much complex. The technology rely on a mist maker module. In addition, these mist makers are easy to use. The mist makers need work under a good water quality.
How to Install 3D Vapor Fires Insert
1. To install an Art vapor fireplace, you need to create a housing (a surface that will support the fireplace insert). Prepare the housing with cutout exactlt to the specifications provided.10mm wider than the drawings for the housing.
2. Leave holes or gaps for air intake bellow the fireplaces.
People may use vapor fires in many different places with different decorations,for traditional fireplace designs with/without logs or for modern designs with/without glasses arround, for different designs,we should make sure if there is enough air intake bellow the fireplace to let the vapor go upwards.
3. Plug in the system and insert it into the housing.
A standarded Volt electrical outlet is required. (best located inside the housing). The system comes with a 100/240V (50-60 Hz) – 24V UL Listed power adapter (converter). Unlike other vapor fire systems, an Art Fire vapor fire works with a low voltage system, so it is much safer.
4. Fill the tank with tap water (or hook up the system to plumbing).
If people want to connect the water pipe to the fireplace, people can prepare a water plastic tube from the water pipe system in the housing and connect it to the fireplace. Turn on the faucet, water will comes into the fireplace automatically. When it comes to a spirit level,it will stop injection.So people no need to add water into the fireplace manually any more. Suggested Range for Water Vapor Fireplaces is 3.5 to 8.5 Grains Per Gallon, Ideal is 7.0. And if people will not use the vapor fireplace, it is better to drain all the water out inside the fireplace to keep the tank inside clean.
النشرة الإخبارية
الاتصال بنا
+86 13928878187
